Products
Products

Tool-Temp TT-390 Mold temperature

Tool-Temp TT-390 Mold temperature

TOOL-TEMP mainly produce products such as mold temperature controllers, water/oil temperature controllers, and coolers.
provide products and services related to optimal temperature control for a variety of production fields (die casting, injection molding, pharmaceutical and scientific, food manufacturing, etc.).

[About]

Tool-temp was founded in 1973 and is headquartered in Switzerland. mainly produce products such as mold temperature controllers, water/oil temperature controllers, and coolers.
provide products and services related to optimal temperature control for a variety of production fields (die casting, injection molding, pharmaceutical and scientific, food manufacturing, etc.).

[Product Features]

Designed or use with oil up to 360*C, the TT-390 TCU features Tool-Temp’s C-571 high temperature leakproof pump.
Heating capacity: 16 kW or 24 kW
Operational use:
Moulds in the die casting industry, small rollers and plates

  • Closed hot oil circuit with integral cold oil receiver in large expansion tank – long oil life due to low heater loads/high flow rate.
  • Self-optimising microprocessor controller with digital display of set and actual temperature.
  • Leak-proof high temperature pump, designed for temperatures up to 400*C. The type C-571 pump features a three-bearing shaft with triple sealing system. This allows us to guarantee a leak-proof system and leak- resistant pump even at maximum working temperature. A bypass allows circulation in the event of the circuit becoming blocked.
  • Connection for optional external thermocouple.
  • Leakstopper – operation in pressure or vacuum mode, to allow continuous production despite leakage from mould or connections.
  • Automatic mould drain
  • Automatic temperature control – audible alarm sounds when unit deviates outside 5*C preset (adjustable).
  • Heating switchable in stages.
  • Limescale-free heat exchanger.
  • No oil cracking.
  • No cooling-down required before switching off

[Microprocessor Temperature Controller]

MP-888 and MP-988 can be adjusted to indicated ℃ or ℉.
Self-optimizing feature allows a very hjgh regulating accuracy even at high temperatures.
adheres to the set temperature independently of the consumer.

[Flow rate adjustment]

Display in litres/min(British) or gallons/min(American) .
If the flow rate falls below the minimum value, an alarm is triggered.