Products
Products

Tool-Temp TT-390/2 Mold temperature(Double-circuit oil)

Tool-Temp TT-390/2 Mold temperature(Double-circuit oil)

TOOL-TEMP mainly produce products such as mold temperature controllers, water/oil temperature controllers, and coolers.
provide products and services related to optimal temperature control for a variety of production fields (die casting, injection molding, pharmaceutical and scientific, food manufacturing, etc.).

[About]

Tool-temp was founded in 1973 and is headquartered in Switzerland. mainly produce products such as mold temperature controllers, water/oil temperature controllers, and coolers.
provide products and services related to optimal temperature control for a variety of production fields (die casting, injection molding, pharmaceutical and scientific, food manufacturing, etc.).

[Product Features]

Designed or use with oil up to 360*C, the TT-390 TCU features Tool-Temp’s C-571 high temperature leakproof pump.
Heating capacity: 2 x 16 kW or 2 x 24 kW
Operational use:
Moulds in the die casting industry, small rollers and plates

  • Digital flow indication with control of the minimum flow.
  • Self-optimizing temperature controller with digital display of the set and actual temperature.
    With high precision regulation in 1/10 range; can be adjusted to read ℃ or ℉.
  • Automatic temperature control.
  • Reversing switch for temperature controlling at the mould.
  • Leakstopper device –
    unit can be used in pressure or vacuum mode. No medium is lost at leaking tools, therefore ensuring continuous production.
  • Automatic mould drain.
  • Heating switchable in stages – the unnecessary heating capacity will switch off automatically.
  • Lime scale free heat exchanger.
  • Leak free high temperature pump with axial face seal or with seal less magnetic drive.
  • Hot oil circuit with by-pass, which ensures internal circulation if valves are closed.
  • Expansion tank with a drip pan.
  • No oil cracking because of special construction of the heating elements.
  • Safety devices:
    • -Automatic level control for dry run protection.
    • -Electronic temperature limiter in the controller and separate mechanical safety thermostat.
    • -Main switch, transformer and motor protection switch.
    • -Horn in case of failure.
  • All failures are visually indicated.
  • Unit on castors.

[Microprocessor Temperature Controller]

MP-888 and MP-988 can be adjusted to indicated ℃ or ℉.
Self-optimizing feature allows a very hjgh regulating accuracy even at high temperatures.
adheres to the set temperature independently of the consumer.

[Flow rate adjustment]

Display in litres/min(British) or gallons/min(American) .
If the flow rate falls below the minimum value, an alarm is triggered.