Eliminate die casting shrinkage. The Jet Cool System is an effective method to prevent shrinkage, core pin from breaking and extend the life of dies.
JECSS Jet Cool System cools core pin.
φ4 is the smallest core pin diameter. By sending cooling water to the tip of the pin then purge with compressed air, the system is a highly effective way of cooling spots that are needed. All you need connect a single signal from the die casting machine, and all you need are power, water, and compressed air. Very simple installation. The system has CE certification.
Jet Cool System is cooled core pin. With pin diasmter ranging from φ4～10, the Jet Cool System can prevent die casting shrinkage and extend the life of core pin and die.
・Advanced magnesium hot chamber die casting machines serialization.
・Excellent stability and durability which enabled prolonged high cycle casting continuously.
・Standard equipped multi-language touch panel and piston type accumulator.
・Maximum injection speed realized 6m/sec by dry shot.
・Less air trapped in the metal flow during die fill, it makes the casting parts excellent.
・With parting injection system, it makes less re-melting material and can reduce a lot of re-melting cost.
・Sprueless system it makes die opening stroke shorter.
The unique electric servo system achieves “Smart die-casting” realizing high-cycle, high-stability, and energy-efficient operation.
The machine is compact and eco-friendly.
Eliminate die casting shrinkage. The Jet Cool System is an effective method to prevent shrinkage, core pin from breaking and extend the life of dies.
TOYO INNOVEX (former: TOYO MECHANICAL METALS) newly released the cold chamber hydraulic die casting machine model.
The V7EX Series are High-spec machines integrated a new control system that can be achieved 100G of high acceleration.
This is a highly functional Die-Casting machine that can cast various products to support diversified Die-Casting demand.
・Less air trapped in the metal flow during die fill, it makes the casting parts excellent.
・With parting injection system, it makes less re-melting material and can reduce a lot of re-melting cost.
・Sprueless system it makes die opening stroke shorter.
